Olloclip 4-in-1 Photo Lens & Ollocase for iPhone 6 or 6 Plus
Ollocase for iPhone 6 and iPhone 6 Plus is designed to work seamlessly with Olloclip lens systems by simply attaching the lens to the top of the device. Pure protection with no moving parts or need to remove your case. Shooting quick photos with your Olloclip lens has never been easier. The all-new Olloclip has been completely redesigned for the iPhone 6 and iPhone 6 Plus with four advanced-optic lenses (Fisheye, Wide-Angle, 10x Macro, 15x Macro). The case features "olloclip-ready" for use with olloclip lens systems, rubberized bumpers for complete control, sturdy scratch-resistant back for added protection, and raised bezel keeps the screen from contacting flat surfaces. Precision coated glass optics deliver superior clarity. The pocket-sized design now works on both front and rear-facing cameras so you can let your photos and selfies run wild.
- Camera: 1-3/4"L x 2-1/2"W x 1"H
- iPhone 6 Case: 5-1/2"L x 2-3/4"W x 1/4"H
- iPhone 6 Plus Case: 6-1/4"L x 3-1/4"W x 1/4"H
- Use a soft, lint-free cloth to clean your iPhone before putting it in your olloCase.
- 1. With the cut-out at the top, align your iPhone's side mute key with the side panel of the olloCase.
- 2. Push your phone into place until the rubber sides wrap snugly around the phone.
- 3. With your olloCase on your phone, slide the lens clip over the top of your phone, and align it with the rear-facing camera.
- 4. The olloclip is now ready to use with both the front and rear cameras on the iPhone 6. On the iPhone 6 Plus, gently slide the lens to the left until it stops to use the front-facing camera.
- 5. Lenses can be used with either the front or rear camera on your phone. To change the lens direction, slide the clip up to remove it, rotate the clip direction, and slide it back onto the phone.
- 6. To use your lens on a phone without an olloCase, reinstall the olloclip insert.
Made in China
Care Instructions: We recommend keeping your device and olloclip products free of all debris and foreign particles to prevent any damage to either product. Olloclip products will not damage your device, but debris and foreign particles that come between your olloclip product and device could cause damage. Prior to putting your olloclip product on your device, use a soft, lint-free cloth to clean your device. It is also recommended that you ensure there is not any debris or foreign particles on the olloclip product itself. Placing an olloclip product on a device with a broken front or rear glass may cause pieces of glass to become embedded into the olloclip product and could cause damage to devices with which the olloclip product is subsequently used.