Look no further if you're seeking an affordable and convenient solution to help diminish unwanted body hair! The Silk'n Flash & Go employs pulses of light to permanently reduce hair regrowth on body. This portable, handheld device brings professional-grade technology for use on-the-go or in the comfort of your own home.
WHO IT IS FOR:
Perfect for anyone with a busy lifestyle who wants to help diminish unwanted body hair. If you want a convenient, affordable solution, Silk'n Flash & Go is for you!
Please refer to the included instructional booklet and DVD for more information about using your Silk'n Flash & Go Hair Removal unit effectively. Click here to view the User's Manual.
Please view the above Disclaimers tab for how to use, care instructions and disclaimer information.
HOW TO USE:
Silk'n Flash & Go Device:
Prior to use, the skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants. Effective treatment requires shaving of hair with a series of 6 to 8 treatments, with the first 3 treatments occurring every two weeks, and subsequent sessions occurring when hair growth re-appears.
Remove the device and other components from box. Verify that the disposable lamp cartridge is inserted properly at the tip of the device. Plug the adapter cord into the unit's socket. Plug the adapter into an electric outlet. The Standby indicator light will turn on. Your device is now ready to start.
Press the On/Standby switch. The Power On indicator light will turn on. Approximately 3.5 seconds after pressing the On/Standby switch, the Ready indicator light will turn on. The device sets itself to deliver the lowest energy level pulses. The device is then ready for you to trigger the first pulse. If the energy level should be higher than the lowest, press the Energy Level setting buttons using the "-" or "+" to respectively decrease or increase the energy level, until the desired energy level is set. Energy Level indicator lights will coincide with the energy level setting.
Apply the treatment surface firmly to the skin, making sure the skin is spread evenly and smoothly. As soon as the treatment surface is in full contact with the skin, the ready indicator light will start blinking. Press the Pulse button. The device will first determine the color of your skin. If the color of the skin is light enough for safe application, the device will flash a pulse of light onto your skin, and the ready indicator light will turn off. The device will immediately recharge for the next pulse. After 3.5 seconds, the Ready indicator light will turn on again. If you see no light pulse and the skin tone warning indicator light blinks your skin tone, measured by the skin color sensor is too dark for safe application. Remove the treatment surface from the treated area, and move the treatment surface to another area of skin. Use the pressure marks the device just made on your skin to guide you for proper positioning of the next pulse, avoiding both gaps and overlaps between pulses.
Warning: Do not treat the same area of skin more than once per hair removal session. Doing so increases the likelihood of adverse effects.
1. Do not expose treated areas of skin to the sun without sunscreen (50+) for at least 2 weeks following the last Silk'n session.
2. Not for use on naturally dark skin complexion.
3. Do not use on tanned skin or after recent sun exposure.
4. Will not work on light, naturally white, grey, blonde or red body hair.
5. Do not use if you are pregnant, nursing, or have been exposed to tanning machines in last 28 days. Do not use on areas of the skin with a tattoo, permanent makeup, or naturally occurring spots or bumps. Avoid use on skin with infections, rashes or sensitivity to light. Avoid use if skin has been treated with medication in the past six months. Do not use if you suffer from epilepsy, have an active medical implant, or a history of skin cancer.
Limited one year vendor warranty.
Lamp cartridge will last for approximately 1,000 pulses. To replace a disposable lamp cartridge, press the On/Standby switch to turn the device to Standby mode. Unplug the power adapter from the electrical outlet. Grasp the used disposable lamp cartridge on both sides, pull it out of the socket and discard with trash. Unwrap a new disposable lamp cartridge. Push the new disposable lamp cartridge gently into place.
After replacing the disposable lamp cartridge with a new one, always set the energy to be one level lower than your normal setting. Raise the energy level back only if you do not experience abnormal discomfort during or after the treatment.