Haute hoop earrings for your happening lifestyle! Designed with 18K yellow gold embraced™ bronze, each earring in this pair boasts a five-hoop design that connects at the top. Two hoops feature a silver-tone glittery appearance while three hoops feature a darling diamond cut finish for added glam. At only 1” in length, these beauties won’t slow you down or get in your way.
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.
The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.
To care for your plated jewelry items:
Earring Back Types
Butterfly Back: A double looped piece resembling a butterfly that fits over a post. Variations on this design are called push back clasps. The basic post and butterfly back are usually used for stud earrings and lighter weight drop earrings.
Hinged Snap Backs: This clasp features a hinged post that snaps into a groove on the back of the earring. It is commonly found on hoops. Sometimes the hinged post is curved to provide more room to fit around the ear, sometimes called a saddleback.
Hook Backs: This earring backing is simply a long, bent post that fits through the piercing. Hooks have several variations, most notably the shepherd's hook and the French hook. While thin wire hooks reduce the weight of long earrings, making them more comfortable, they aren't as secure as other clasp styles.
Lever Back: A hinged lever snaps shut against the curved post to form a closed loop around the ear lobe. This clasp is very secure and good for large or medium sized styles that drop just below the ear.
Omega: Also called French clips, this clasp has a straight post and a looped lever. The hinged lever closes around the post and is held against the ear with pressure. The omega clasp is the most secure clasp, especially for the larger, heavier earrings.
Screw back: This backing is a slight variation of the standard post and butterfly nut back. Instead of pushing on the back, the nut twists onto the threaded post. A screw back post design is often preferred for expensive diamond stud earrings that require increased security.