The Medium choice has a diamond weight of 1.42ct, and the Large choice has a diamond weight of 1.57ct (both approxmate). All diamonds have a clarity grade of I2-I3 and a color grade of H-I. The Medium choice measures 7-1/2"L x 1/8"W x 1/8"H, and the Large choice measures 8"L x 1/8"W x 1/8"H.
Please note: Gemstone may vary in color and/or pattern. Please allow for these natural variations.
Part of the Southport Diamonds Collection. Made in India. All weights pertaining to gemstones, including diamonds, are minimum weights. Additionally, please note that many gemstones are treated to enhance their beauty. Click here for important information about gemstone enhancements and special care requirements.
Necklace & Bracelet Clasp Types
Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp. This type is also considered a more expensive finding that can add to the overall value of the jewelry piece.
Magnetic Clasp: The popularity of the magnetic clasp has greatly increased in recent years. It is a quick and easy way to secure jewelry while not having to fuss with a tiny clasp, which can be difficult if you have long fingernails, arthritic hands or other mobility challenges. A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.
Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp. Although this type of clasp is found on both bracelets and necklaces, it is particularly popular on bracelet styles. These types of clasps are often reserved for more expensive jewelry.
Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.
Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.
The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.
To care for your plated jewelry items:
The value of a diamond is determined by the Four Cs: Cut, Color, Clarity and Carat weight.
The cut of a diamond (the depth, width and uniformity of the facets) determines the stone’s brilliance and sparkle. Even if a diamond has perfect color and clarity, a poor cut can make it look dull. A diamond’s proportions determine how well the light will reflect and refract within the stone, with symmetry of the cut being extremely important.
Acting as a prism, a diamond can divide light into a spectrum of colors, reflecting light as colorful flashes called fire. Color within a diamond diminishes the brilliance of the stone by diminishing the spectrum of colors that are emitted. A colorless diamond disperses light throughout the entire stone. Therefore, the less color that is in a diamond, the more colorful its fire, the better its color grade, and the greater its value (and priced accordingly). Diamond color is graded using an alphabetical range from D-Z (D being totally colorless). Diamonds graded better than J are colorless or near-colorless, with color that is typically undetectable to the unaided eye. Color K-Z is especially noticeable when set in platinum or white gold.
Most diamonds naturally have small internal flaws called inclusions, which interfere with the passage of light through the stone. Diamonds free of inclusions are very rare, highly valued and the most expensive. The size, number, position and color of these imperfections determine a stone’s clarity grade.
Carat is the standard unit of measurement used to determine a diamond’s weight. One carat consists of 100 points, so a 50-point diamond equals a half carat, or 0.50ct. It is important to remember that although two diamonds may have the same carat weight, their color and clarity may be different, thus determining each individual stone’s value. Additionally, since larger diamonds are more rare than smaller diamonds, diamond value tends to rise exponentially with carat weight. A 2.00ct diamond is more valuable than two 1.00ct diamonds.
More About Diamonds
The most precious of all gems, diamonds have an incredible rarity factor. It takes a minimum of one million diamonds to be mined in order to find a 1.00ct gem-quality diamond, so each 1.00ct quality diamond is literally one in a million. Making them even more incredible, the mining of diamonds requires moving and sifting 250 tons of the Earth’s crust to find just one diamond. Mining companies literally move mountains to find diamonds.
Diamonds have the longest endurance of any substance known on Earth. Carbon dating has established that diamonds, on the average, are 3.4 billion years of age. They consist of pure carbon and there is no chemical difference between them and carbon powder (the lead pencil center). Obviously, however, the physical difference between carbon powder and a diamond is fascinating. Diamonds are created from a basketball-sized piece of pure carbon that becomes white-hot. It is squeezed to the size of a small pearl, turning from black to clear in the process and becoming the hardest material known to humans, ranking a 10.0 on the Mohs Scale . Because they are so hard, diamonds can only be ground and polished by using diamond dust that has been ground from other diamonds.
Diamonds are found in a rainbow of colors. The value of a fancy-colored stone depends largely on the rarity of its color (reds and greens are rarer than yellows and browns), the saturation of the color (from faint to vivid), and the purity of the color (whether it is bright and clear or clouded by other underlying colors). Probably the most famous colored diamond is the Hope, which features a deep-blue color and weighs an amazing 45.52ct. It can be seen at the Smithsonian Institute in Washington, D.C.
With diamonds found all over the world, America has a couple small producing diamonds mines, but it only produces industrial grades with non-gem grade material. These black and brown industrial-grade diamonds are widely used as cutting and grinding tools in various industries, such as oil drilling and stone carving.
Diamonds have come to symbolize the ultimate gift of love and romance and, in the United States, are traditionally used in engagement and wedding rings. The tradition of the diamond solitaire engagement ring may have started in 1477, when the Archduke of Austria gave a large solitaire diamond to Mary of Burgundy for her hand in marriage. Amidst this tradition of romance, the diamond is also the birthstone for April and given as 10th, 30th, 60th and 75th anniversary gifts.
Diamonds have been the pride of empires throughout time. Ancient Hindu followers believed diamonds were created by thunderbolts striking the ground. Ancient Greeks believed that diamonds were teardrops of the gods and splinters of stars that had fallen to Earth. The stones were believed to possess magical qualities and have powers far beyond the understanding of common man. Even the name stems from “adamas,” the Greek word for “unconquerable” and “indestructible.”
The diamond is considered the most magical of all gems. When worn, it promotes spirituality, even ecstasy, and is often utilized in meditation. The diamond promotes self-confidence in relations with the opposite sex and is often worn to conquer infertility. The diamond is the stone of love and is worn to ensure fidelity. Owing to its sparkling and flashing nature, it has long been regarded as a stone of protection and peace. It can be worn today for courage and strength, and represents fearlessness and invincibility.
Since only diamonds can scratch other diamonds, it is important to wrap and store your diamond jewelry pieces separately so they do not touch one another. To clean jewelry at home, soak diamonds in warm, sudsy water made with any mild liquid detergent. Brush with a soft toothbrush and rinse and pat dry with a soft, lint-free cloth. Other effective cleaning methods include soaking diamonds in household ammonia, brand-name liquid jewelry cleaners, or even a glass of vodka.