A perfection made just for your stylish self! Crafted from 18K yellow gold embraced over sterling silver, this gleaming ring showcases one round rough cut 20mm coated drusy in platinum or blue colors and set in an adhesive setting. A halo of various round cut 1.5mm black spinels surrounds the drusy in prong settings. A polished shank hugs your finger with a comfortable fit.
Part of the Portofino Collection. Made in Italy. All weights pertaining to gemstones, including diamonds, are minimum weights. Additionally, please note that many gemstones are treated to enhance their beauty. Click here for important information about gemstone enhancements and special care requirements.
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.
The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.
To care for your plated jewelry items:
There are several different spellings, but “druzy,” “drusy” and “druse” all refer to minute quartz crystals that form within or on other stones. When ground water carrying dissolved silica is forced into a porous area of rock, rapid cooling often occurs. It causes the formation of tiny crystals on top of previously deposited minerals or gemstones, particularly quartz, chalcedony or agate. The cutting of druzy cabochons begins with a rough agate geode. After removing the outer layers of agate, the inner cavity with the druzy is revealed. These pieces are then cut so that a thin layer is left with the druzy crystals appearing on the top. The agate portion of each piece is then shaped, sanded and polished.