Accentuate your charming bracelet or chain with this lovely charm! Crafted from 18K yellow gold embraced over sterling silver, this gorgeous charm features a pear shaped 6.5 x 6.0mm drusy in your choice of blue, rose, silver or gold colors.
Part of the Portofino Collection. Made in Italy. All weights pertaining to gemstones, including diamonds, are minimum weights. Additionally, please note that many gemstones are treated to enhance their beauty. Click here for important information about gemstone enhancements and special care requirements.
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.
The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.
To care for your plated jewelry items:
There are several different spellings, but “druzy,” “drusy” and “druse” all refer to minute quartz crystals that form within or on other stones. When ground water carrying dissolved silica is forced into a porous area of rock, rapid cooling often occurs. It causes the formation of tiny crystals on top of previously deposited minerals or gemstones, particularly quartz, chalcedony or agate. The cutting of druzy cabochons begins with a rough agate geode. After removing the outer layers of agate, the inner cavity with the druzy is revealed. These pieces are then cut so that a thin layer is left with the druzy crystals appearing on the top. The agate portion of each piece is then shaped, sanded and polished.