These two-tone hoop-shaped earrings will add an alluring touch to your outfit. The earrings are made of sterling silver and palladium with rhodium and 18K yellow vermeil accents, and have beautiful detailed scroll-work. Each earring has one round 10mm Baltic amber bead at the bottom and eight round cut 1.5mm white sapphires in bead settings.
Part of the Gems en Vogue Collection. All weights pertaining to diamond weights are minimum weights. Additionally, please note that many gemstones are treated to enhance their beauty. Click here for important information about gemstone enhancements and special care requirements.
Earring Back Types
Butterfly Back: A double looped piece resembling a butterfly that fits over a post. Variations on this design are called push back clasps. The basic post and butterfly back are usually used for stud earrings and lighter weight drop earrings.
Hinged Snap Backs: This clasp features a hinged post that snaps into a groove on the back of the earring. It is commonly found on hoops. Sometimes the hinged post is curved to provide more room to fit around the ear, sometimes called a saddleback.
Hook Backs: This earring backing is simply a long, bent post that fits through the piercing. Hooks have several variations, most notably the shepherd's hook and the French hook. While thin wire hooks reduce the weight of long earrings, making them more comfortable, they aren't as secure as other clasp styles.
Lever Back: A hinged lever snaps shut against the curved post to form a closed loop around the ear lobe. This clasp is very secure and good for large or medium sized styles that drop just below the ear.
Omega: Also called French clips, this clasp has a straight post and a looped lever. The hinged lever closes around the post and is held against the ear with pressure. The omega clasp is the most secure clasp, especially for the larger, heavier earrings.
Screw back: This backing is a slight variation of the standard post and butterfly nut back. Instead of pushing on the back, the nut twists onto the threaded post. A screw back post design is often preferred for expensive diamond stud earrings that require increased security.
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.
The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.
To care for your plated jewelry items:
Amber is fossilized resin from ancient plants, especially coniferous trees. Tens of millions of years ago, if the conditions were right, this sticky resin would become encased in earth and gradually become fossilized. Resin that has not completely fossilized is called copal.
Sometimes leaves, bits of wood, and even the whole bodies of insects would be trapped along with the resin. Pieces of amber with the intact remains of ancient insects or other small organisms are rare and highly valued. More than 1,000 extinct species have been identified in amber.
Jewelry and History
Amber is translucent and range in color from dark brown to a light lemon yellow. It is very soft, with a hardness of 2.5 on the Mohs Scale, and it can be scratched easily. Jewelry with amber cabochons should be worn with care to prevent damage to the stones.
Amber has been used as jewelry for thousands of years. Homer mentions amber jewelry—earrings and a necklace of amber beads—as a princely gift in The Odyssey. Amber can be burned, and this produces a strong aroma the ancient Germans used as incense; they called it bernstein, or “burn stone.” Clear, colorless amber was considered the best material for rosary beads in the Middle Ages due to its smooth, silky feel.
Today, two main sources of amber are the Baltic Sea and the Dominican Republic. Amber from the Baltic states is older, but amber from the Dominican Republic is more likely to have insect inclusions.
A selection of our jewelry is made of sterling palladium alloy. Palladium is a member of the platinum group of precious metals. By replacing a portion of the copper content used in standard sterling silver with palladium, this proprietary formula renders a precious metal with superior performance attributes. Sterling palladium is five times more tarnish-resistant than standard sterling silver and has strength similar to that of 14K gold.
Palladium has been used as a precious metal in jewelry since 1939, originally as an alternative to platinum for making white gold. Its naturally white color requires no rhodium plating. Additionally, palladium is proportionally much lighter than platinum and is ideal for use in heavier gemstone jewelry. It is a more expensive alloy than nickel, but it seldom causes the allergic reactions that nickel alloy can.
To care for your plated jewelry items: